|
|
|
Zabel Equipment ZC1600 Belt Conveyor
|
|
The Zabel Equipment Models ZC1600 Belt Conveyors will handle a large volume of material for little cost. This conveyor is designed to be “inexpensive”, not “cheep”. With formed 12ga. steel sections, spanning 30’ is no problem. Greaseable 1-1/4” bearings on the drive and tail drums provide for years of trouble free service. You have a choice of 3 different drive types; standard roller chain and sprocket reduction, right-angle worm gear reducer, and direct drive hydraulic motor. Options include; covers, hopper, plow-off, adjustable incline joint, adjustable decline joint, 5degree decline section, external and internal belt scrapers, rotary brush, reverse kit, smooth belting, ruff top (crescent) belting, cleated belting, and support brackets. A better built conveyor for the money will be hard or maybe impossible to find.
Three optional drive types to best meet your material handling needs:
Standard chain and pulley drive is used in most units. Automatic chain tightener prevents unnecessary maintenance. Right or left side drive is available to fit any application.
Compact hydraulic drive is available on all models. Hydraulic drive offers variable belt speeds to best suit different type of materials.
Optional gear reduction drive is totally enclosed, a big plus for industrial applications. The compact size and oil-bathed gears are other big advantages.
Heavy greasable bearings are used throughout the drive and idle. This
prolongs bearing life and prevents costly breakdowns.
Optional power brush cleans material off belt, preventing carry back of material and providing a cleaner work place.
Drive rollers are covered with heavy rubber lagging to prevent belt slippage. Crowned design of rollers assures center belt tracking.
As shown in this idle roller, the unique open-wing design helps prevent material build-up on the roller. Also, note the sturdy construction, for years of reliable service.
Optional 6 degree decline section allows you to maintain the concave in the belt while declining. This keeps the material in the center of the belt. Sections are 12" long and can be assembled with a 1' or 2' section to attain up to 42 degrees of incline.
-
Large Capacity
- Low H.P. Requirements
- Simple Design
- Easy to Maintain
- Easy to install, only 4 bolts per section
- Heavy 12 gauge construction
- Compact Drive & Idle allows installation where there is limited space
- Reversible so it may save on additional unit
- No material separation: as material simply lays on belt until dropped off. No paddles dragging material in trough to gum up in certain kinds of material.
- Standard sections in 1 - 2 - 4 - 8 foot can make any length conveyer from 8 feet to 150 feet.
- Less installation time. So easy to install anyone can assemble without any special tools or experience.
- Slower belt speed means less H.P. and less wear to give longer life and less maintenance for years of trouble free operation.
- The industrial designed belt conveyer will do your conveying job better at a lower cost over the years.
|
|
Zabel Equipment ZC2400 Belt Conveyor
|
|
The Zabel Equipment Models ZC2400 Belt Conveyors will handle a large volume of material for little cost. This conveyor is designed to be “inexpensive”, not “cheep”. With formed 12ga. steel sections, spanning 30’ is no problem. Greaseable 1-1/4” bearings on the drive and tail drums provide for years of trouble free service. You have a choice of 3 different drive types; standard roller chain and sprocket reduction, right-angle worm gear reducer, and direct drive hydraulic motor. Options include; covers, hopper, plow-off, adjustable incline joint, adjustable decline joint, 5degree decline section, external and internal belt scrapers, rotary brush, reverse kit, smooth belting, ruff top (crescent) belting, cleated belting, and support brackets. A better built conveyor for the money will be hard or maybe impossible to find.
Three optional drive types to best meet your material handling needs:
Standard chain and pulley drive is used in most units. Automatic chain tightener prevents unnecessary maintenance. Right or left side drive is available to fit any application.
Compact hydraulic drive is available on all models. Hydraulic drive offers variable belt speeds to best suit different type of materials.
Optional gear reduction drive is totally enclosed, a big plus for industrial applications. The compact size and oil-bathed gears are other big advantages.
Heavy greasable bearings are used throughout the drive and idle. This
prolongs bearing life and prevents costly breakdowns.
Optional power brush cleans material off belt, preventing carry back of material and providing a cleaner work place.
Drive rollers are covered with heavy rubber lagging to prevent belt slippage. Crowned design of rollers assures center belt tracking.
As shown in this idle roller, the unique open-wing design helps prevent material build-up on the roller. Also, note the sturdy construction, for years of reliable service.
Optional 6 degree decline section allows you to maintain the concave in the belt while declining. This keeps the material in the center of the belt. Sections are 12" long and can be assembled with a 1' or 2' section to attain up to 42 degrees of incline.
-
Large Capacity
- Low H.P. Requirements
- Simple Design
- Easy to Maintain
- Easy to install, only 4 bolts per section
- Heavy 12 gauge construction
- Compact Drive & Idle allows installation where there is limited space
- Reversible so it may save on additional unit
- No material separation: as material simply lays on belt until dropped off. No paddles dragging material in trough to gum up in certain kinds of material.
- Standard sections in 1 - 2 - 4 - 8 foot can make any length conveyer from 8 feet to 150 feet.
- Less installation time. So easy to install anyone can assemble without any special tools or experience.
- Slower belt speed means less H.P. and less wear to give longer life and less maintenance for years of trouble free operation.
- The industrial designed belt conveyer will do your conveying job better at a lower cost over the years.
|
|
Zabel Equipment ZC3600 Belt Conveyor
|
|
“Extra Heavy-Duty Construction and Great Capacity” is the best way to describe the Zabel Equipment Model ZC3600 36” Belt Conveyor. From it’s large 12” diameter drive and tail drums with 1-1/2” replaceable shafts, to 12ga. and 7ga. steel construction, this conveyor proves to be heavy, heavy, heavy! Spanning up to 30’ also proves the strength of this conveyor. With 4 different type of drive units; standard chain and sprocket reduction, right angle worm-gear and motor reduction, shaft mount gear reducer, and hydraulic motor; there is a style to fit any application. Other options include; covers, adjustable incline joint, adjustable decline joint, 5degree decline section, oversized hopper, smooth belting, ruff top (crescent) belting, cleated belting, external and internal belt scrapers, rotary brush, and support brackets. So if You are in the market for a large capacity conveyor, the Zabel Equipment Model ZC3600 36” Belt Conveyor is the one for you.
Drive units are available with either; chain and sprocket reductions, shaft mount reducer, or direct drive hydraulic motor. Large diameter drive drum and pinch roller provides positive traction on conveyors up to 200' in length. External belt cleaners (not shown) are also available, to help keep surrounding areas clean.
Large diameter tail pulley put less stress on belt splice. Pinch roller provides positive tracking in bi-directional conveyors 11' of tail roller adjustment allows plenty of belt take-up for longer conveyors. Optional internal belt scrapper (not shown), clears material that is trapped between belts, greatly reducing roller build-up.
|
|
Zabel Equipment ZCF 1600 Belt Feeder
|
|
If You have been looking for a durable, simple operating bunk feeder, you just found it with the Zabel Equipment Model ZCF1600 16” Belt Feeder. Heavy steel construction dipped in enamel paint, and greasable bearings will give you years of reliable service.
In most installations a single motor drives both the conveying belt and plow(s), distributing feed evenly throughout the length of the bunk. Power from the motor is distributed to the plow using a right angle worm-gear reducer, and A2050 roller chain in a continuous loop.
Driven with a #40 roller chain from the jack shaft, positive plow movement is achieved, unlike a twisted “V” belt and cable system. Plow options are; standard one-way; two-way, with 3 optional trips; and by-pass, with 2 optional trips. Other options include; heavy-duty drive for longer lengths, reverse kit, center fill kit (for dropping feed on to the conveying belt anywhere between drive and idle unit, or for multiple plows in a multi-lot feed bunk), wind boards, covers, independent plow drive, longer length hoppers, and leg stands.
Positive chain drive makes this design rugged enough to provide years of reliable service. Heavy greasable bearings used throughout the feeder promise maximum bearing life. Adjustable drive roller makes centering the belt easy, even on reverse applications.
Optional 2-way plow swivels from side to side to allow single lot or multiple lot feeding. Constructed of steel and 1/4" vinyl for years of reliable service. 16" PVC belting is rated at 120 lbs. per square inch. Belting is also low temperature, ensuring flexibility on cold mornings.
Totally enclosed oil bath gear box gives years of consistent, trouble free service. Drives plow smoothly without the slippage sometimes associated with belt driven plows. Direct chain drive is another big advantage over belt driven models.
A single motor will drive belt and plow for single lot or dual lot feeding. Sturdy No. 20/50 chain drives plow and prevents slippage on frosty mornings. Simple design of plow carriage ensures dependable, problem-free service.
By adding a 1/2 horsepower motor and an optional independent plow drive this feeder can double as a conveyor. The plow will stop anywhere to plow off feed into a mixer, conveyor, or another feeder. The same feeder
will still fill a feed bunk or can be used for in barn feeding.
Check out these advantages of the Zabel Equipment 1600 Feeder:
- 2', 4', and 8' sections make up any length desired
- One-way and Two-way plows
- Galvanized windboards - Galvanized covers
- Legs and eg brackets - 2' and 4' galvanized hoppers
- Multiple and split lot feeding set-ups
- Independent plow drive
- Large capacity, handles upt to 3 unloaders
- Heavy Duty Steel construction and simple design
- Easy maintenance, greasable bearings throughout
- Less installation time due to common sense design
- Sturdy belt tightener, course 3/4" threads resist moisture and corrosion
- Double-dipped steel frames resist rust and silage acid
- Wide variety of options and accessories to fit almost any set-up
- Completely shielded for your safety
- Compact idle and drive allow installation in limited spaces
|
|
Zabel Equipment ZTF 1630 16 Belt Feeder
|
|
The ZTF 1630 Center Fill feeding concept may be ideal for your feed lot system. A quality center fill feeder that moves smoothly with less moving parts can save you time and money.
Our unique design is powered by he hydraulic system shown here. A bi-directional valve and orbit motor are used to reverse the travel direction. By allowing the electric motor to run in one direction, instant reverse motor and reverse switching problems are eliminated! Cold winter days are not a problem with the us of automatic transmission fluid to run the system.
Even distribution of all types of feed is a huge advantage of this feeder. Hanging near the bunk roof is a big benefit in keeping the feeder out of the weather. It also eliminates the problem of legs rusting off due to contact with the silage. Notice the lack of obstructions in the lower bunk area.
Installation is quick and easy. Support brackets can hang from either cross supports in a bunk, second story floor joists or the ceiling in a barn. Rails are then attached to the support brackets with a clamp by just tightening a set screw. The drive unit and tray sections come pre-assembled from the factory, thus reducing valuable time! Because who has time to waste these days?
A drawback to center fill feeders is the portion of belt or chain that does not drop feed. We have solved the problem with the dead spot feed plow. No more moldy feed sitting on the belt waiting to fall into the bunk and making your animals sick.
The 16" wide belt has the capacity to haul feed away from almost any set-up, from total ration mixers to combined unloaders running at the same time. Saves you time and money by reducing feeding time.
Quiet, easy-rolling UHMW (plastic) wheels carry the feeder tray smoothly along the 2" x 2" angle ion rails. 2050 roller chain is used to pull the tray back and forth. A 3/4" rod protects the chain from being accidentally knocked off the support hooks by curious cattle.
Advantages of the Zabel Equipment ZTF 1630 16" Center Fill Feeder:
- Low horsepower requirements
- Easy installation
- Heavy 12 gauge construction
- Easy to maintain greaseable bearings
- Hydraulic drive
- Can be set-up in bunks or inside barn mangers
- Low profile design allows for maximum clearance beneath feeders
- Quiet operation
- Concave design for increased capacity
- Double-dipped enamel paint covering
|
|
|
|
