Houle 16-Degree Tilting Cable Alley Scraper

16-degree tilting scraper with steel wear blades and standard folding ends for manure alleys with or without groove. Tilting blades start to clean the alley at the very beginning of the stroke and draw less bedding on the back stroke.

Houle 16-Degree Tilting Cable (Adjustable Blades) Alley Scraper

16-degree tilting scraper with Adjustable Flexible Blades for rubber mat and to better clean concrete alleys. Draw bar for groove available. Groove available.

Houle V-Shape Cable Alley Scraper

• Steel blades can be adjusted in order to compensate wear
• Model with low-friction nylon rollers and round edges also available for use in alleys with rubber mat
• Shown with draw bar running in a groove

Houle 16-Degree Tilting Chain Alley Scraper

• Offered for 7/8" and pintle chains: 16-degree scraper, straight scraper and V-shape scraper
• The chain groove ensures the scraper remains centered widthwise and keeps the chain below the floor in order to maintain cow comfort
• Adjustable folding ends are available on 16-degree scraper in order to keep the scrapers centered in alleys without groove
• Adjustable flexible blades available for alleys with rubber mat and to better clean concrete alleys
• Tilting blades start to clean the alley at the very beginning of the stroke and draw less bedding on the back stroke
• Shown with optional center hinge

Houle Straight Chain Alley Scraper

• Three basic models of scrapers are offered for 7/8" and pintle chains: 16-degree scraper, straight scraper and V-shape scraper
• The chain groove ensures the scraper remains centered widthwise and keeps the chain below the floor in order to maintain cow comfort
• Adjustable folding ends are available on 16-degree scraper in order to keep the scrapers centered in alleys without groove
• Adjustable flexible blades available for alleys with rubber mat and to better clean alleys on concrete
• Installation in a groove only

Houle V-Shape Chain Alley Scraper

V-Shape Scraper with replaceable steel blades. Steel blades can be adjusted in order to compensate for wear.

Houle Super Pump Vertical Alley Scraper

• Super Pump to agitate and transfer slurry with limited amount of chopped bedding
• 6" or 8" discharge
• Horsepower: 540 RPM = 70 - 100; 1,000 RPM = 95 - 210
• Optional speed reducer to easily turn the nozzles
• Oil cooler under top gearbox
• Agitation / loading indicator rod
• Rotative directional valve that can be operated while PTO is at low RPM
• 3" to 4" nozzle sized to horsepower
• Ball-and-socket joint with stainless steel ball and urethane gasket
• Otional bottom nozzle. Available with hydraulic cap to get full transfer
• capacity